Polypro blank for your hula hoop DIY project. High quality polypro tube and with approx. 190 gr. (un-taped) super light and super bouncy. The best polypro pipe on the market. Available in 16 or 19 mm tube thickness and available in various pre-cut diameters.
Quantity: if you buy more than one blank, they will be delivered in one piece.
the Polypro blank is always supplied with a matching connector. Attention: in any case, always buy a blank incl. matching connector. The inner diameter of hula hoop tubes can vary slightly. I.e., a tube can be sometimes narrower and sometimes wider inside. I have for all cases the matching connectors in stock, without the need to mill out. So you don’t need any additional tool to insert the connector into the blank.
Required additional material:
To correct the junction, you will need a scalpel. Use the scalpel to cut away small pieces at the ends of the pipe so that each end is neatly joined together and there is no gap at the joint.
You will also need a suitable HSS drill bit for blind rivets and, if you want to build a travel hula hoop, an additional suitable drill bit (5 mm) for the push button . Rivets and push buttons can also be found under accessories.